Alphatemp Technology Ltd PICO DATA LOGGERS

View Cart ||Checkout

PICO DATA LOGGERS

PicoScope High Resolution Data Logger

REF: KI-5203
The no compromise oscilloscope
All other oscilloscopes at this price range force you to compromise on one of three key specifications: bandwidth, sampling rate or buffer memory. With the PicoScope 5000 series you no longer have to compromise.

High bandwidth and sampling rate
At the heart of the PicoScope 5000 is its ability to digitise signals accurately and with minimal distortion. The 250 MHz analog bandwidth is complemented by a real-time sample rate of 1 GS/s. For repetitive signals, an equivalent time sampling (ETS) mode increases the sampling to 20 GS/s.

Huge buffer memory
These days most digital oscilloscopes have high sampling rates, but many of them let you down with a tiny memory buffer which means that you can only use the maximum sampling rate on a few timebases. The massive 128 megasample (128,000,000) buffer memory of the 5204 ensures complex waveforms can be captured at the full sampling rate.

£1,195.00 / €1,434.00

Pico 3 Channel Temperature Data-Logger

REF: KI-TH03
Pico 3 Channel Temperature Data-Logger allows up to 3 channels of temperature to be recorded directly to your PC, it uses precision resistive sensors to give an accuracy that was previously only obtainable using expensive platinum PT100 sensors.

Additional sensors can be added to record Light-level and Door Movement, for additional sensors please see our accessories section.

Supplied with: Pico Log Data Acquisition Software, No External Power Supply Required, RS232 Link-lead, 3 x precision sensors with 5 meter leads.

Temperature Range: -30 to +70°C
Accuracy: +/-0.3°C over range -30 to +30°C

Model	Description	Price
KI-TH03	Pico 3 Channel Temperature Data-Logger	£135.00 / €162.00

Pico 8 Channel Thermocouple Data-Logger

REF: KI-TC08
The KI-TC08 Thermocouple Data Logger offers industry-leading performance and a cost-effective solution to your temperature recording needs.

Offering 8 direct thermocouple inputs, the KI-TC08 is capable of taking accurate and fast readings, and up to 7 units can be used simultaneously on one PC.

Model	Description	Price
KI-TC08	Pico 8 Channel Thermocouple Data-Logger	£249.00 / €298.80

Pico PRT Data-Logger

REF: KI-PT104
The Pico PRT Data-Logger Measures Temperature Resistance and Voltage For use with PT100 and PT1000 Sensors gives High Resolution and Accuracy and requires No External Power Supply.

When measuring resistance, the unit uses a four-wire circuit to give the greatest possible accuracy.

Two resistance ranges are available (0 to 375 Ohms and 0 to 10,000 Ohms). The unit is calibrated for 0 to 375 Ohms so this range should be used for accurate measurements.

The PT-104 is normally connected directly to a PC, but it is also possible to communicate with the PT-104 using a modem (radio or telephone) so that you can collect data from a remote site.

Model	Description	Price
KI-PT104	Pico PRT Data-Logger	£399.00 / €478.80

Pico HumidProbe

REF: KI-HMP1
HumidiProbe is the straightforward and practical way to measure and record humidity and temperature using your PC.

The HumidiProbe is a self-contained humidity and temperature measuring data logger. Simply position the HumidiProbe near the source you want to measure, plug the cable into the USB port on your PC, and you're ready to measure humidity and temperature.

Model	Description	Price
KI-HMP1	Pico HumidProbe	£149.00 / €178.80

Pico Dr DAQ Data Recorder

REF: KI-DRDAQ
Pico's Dr.Daq Data recorder has built in sensors for Light - Sound and Temperature Measurement, it can also measure Voltage and Resistance and has a socket for standard pH Electrodes and connectors for optional external sensors.

It simply plugs into your PC and with the software supplied you can use DR Daq to capture fast signals such as sound wave forms it also requires no external power source.

Model	Description	Price
KI-DRDAQ	Pico Dr DAQ Data Recorder	£79.00 / €94.80

Pico ADC11USB Voltage Signal Data Logger

REF: KI-ADC1110-USB
Pico's ADC11 USB Voltage Signal Data Logger is a low cost solution for converting voltage signals into digital samples for up to 11 voltages at a time.

Measures up to 11 Voltages, 10 bit and 12 bit versions available, 20kS/s Sampling rate, 0 to 2.5V Input range,
2 digital outputs for control or alarm, Interface to PC and power via USB Port, Detachable screw terminal block.

£95.00 / €114.00

Pico USB Adaptor

REF: Ki-1069
The USB to Serial Converter allows you to use all Pico Technology serial devices such as the TC-08, ADC-16, EnviroMon and other serial devices through the USB port on your PC. Installation is simple. Plug your serial device into the Converter. Plug the converter into your computer. Insert the disk.

With USB technology, there are no IRQ conflicts and no COM Port conflicts.

Model	Description	Price
Ki-1069	Pico USB Adaptor	£49.00 / €58.80

We welcome enquiries regarding bespoke solutions.

Call Us: +44/0 1376 344 679, or email:jim@alphatemptech.co.uk