Alphatemp Technology Ltd PICO AUTOMOTIVE

PRODUCTS
PICO AUTOMOTIVE

------
Automotive Diagnostics Kits

Now with up to £180 worth of accessories for FREE

Pico Automotive Diagnostics Kits turn your PC into a powerful automotive diagnostic tool.

Suitable for use with any modern vehicle, and available in both 2 and 4 channel versions, the multi-award-winning Automotive Diagnostics Kits can be used to measure and test virtually all the electrical and electronic components and circuits in a modern vehicle.

KI-PP201 AUTOMOTIVE DIAGNOSTIC PACKKI-PP201
KI-PP201 AUTOMOTIVE DIAGNOSTIC PACK 2 CHANNEL KIT

The Pico Automotive Diagnostics Kit turns your laptop or desktop PC into a powerful automotive diagnostic tool for fault finding the increasing number of sensors, actuators and electronic circuits found on today's vehicles.

Suitable for use with any modern vehicle: -

The Pico Automotive Diagnostics Kit can be used to measure and test virtually all of the electrical and electronic components and circuits in any modern vehicle including:

Ignition (primary & secondary)
Injectors & fuel pumps
Starter & charging circuits
ABS sensors. Crank & cam sensors
Lambda, Airflow, knock & MAP sensors
Glow plugs / timer relays
Relative compression tests
CAN bus

Ideal for use both in the workshop and on the road
The Automotive Diagnostics Kit is powered directly from the USB port of your computer — eliminating the need for power leads or battery packs, and making it suitable for use both for workshop-based and mobile automotive diagnostics.

£825.00 / €1,237.50

KI-PP276 AUTOMOTIVE DIAGNOSTIC PACK 4 CHANNELKI-PP276
KI-PP276 AUTOMOTIVE DIAGNOSTIC PACK 4 CHANNEL

The 4-Channel Automotive Oscilloscope Kit is the latest Automotive Diagnostics Kit from Pico.

The kit includes the PicoScope 3423 automotive oscilloscope a USB PC oscilloscope capable of capturing waveforms from up to 4 sensors at once.

Powered directly from the USB port of your PC, this kit can be used either in the workshop or on the road to test and measure virtually all of the electrical/electronic components and systems in the modern motor vehicle.

The 4-Channel Automotive Oscilloscope Kit is suitable for use with any modern vehicle, does not require vehicle-specific cable harnesses and includes free technical support and software upgrades delivering unrivalled performance and features at a price you can afford.

£1,225.00 / €1,837.50

KI-TA014 FIRST LOOK AUTOMOTIVE DIAGNOSTIC SENSORKI-TA014
The FirstLook Engine Diagnostic Sensor connects to the exhaust or vacuum side of the engine to be tested and offers a fast and accurate method to diagnose automobile engine problems such as burnt valves, bad injectors and other performance problems without major disassembly of the engine.

The FirstLook sensor is particularly suitable for use with a Pico automotive oscilloscope, but can also be used with most other modern lab scopes.

The FirstLook Engine Diagnostics Sensor kit comprises of the following items:-

FirstLook Diagnostic Sensor
25 ft (7.6 m) cable - BNC to BNC cable
45 inch (1.1 m) cable - BNC to banana jack plugs
BNC to BNC adaptor
Vacuum line adaptor

£259.00 / €388.50

KI-PP218 60 AMP AC/DC CURRENT CLAMPKI-PP218
The PP218 is a 10mA to 60A current clamp, ideal for use with a Pico automotive oscilloscope for measuring the current drawn by smaller devices, such as fuel injectors and fuel pumps.

We recommend the use of the TA000 or TA020 automotive test lead (see below) to connect the current clamp to the oscilloscope. Alternatively, a 60A current clamp with BNC connector is available.

Note: the KI-PP218 low amp probe is supplied with shrouded 4mm (banana) plug type connectors so can not be plugged directly into a PicoScope.

£80.00 / €120.00

KI-PP179 600 AMP AC/DC CURRENT CLAMPKI-PP179
The KI-PP179 is a 600A current clamp, ideal for use with a PicoScope oscilloscope for displaying starter current waveforms, charging currents and for performing relative compression tests.

Note: the PP179 high amp probe is supplied with shrouded 4mm (banana) plug type connectors so can not be plugged directly into the PicoScope. We recommend the use of the TA000 or TA020 automotive test lead (see below) to connect the current clamp to the oscilloscope. Alternatively, a 600 A current clamp with BNC connector is available.

£80.00 / €120.00

KI-PP253 2000A CURRENT CLAMPKI-PP253
The PP253 current clamp is suitable for measuring currents of upto 2000A DC or 1500A AC.

Note: the PP253 current clamp is supplied with shrouded 4mm (banana) plug type connectors so can not be plugged directly into the PicoScope. We recommend the use of the TA000 or TA020 automotive test lead (see below) to connect the current clamp to the oscilloscope. Alternatively the MI078 BNC to 4mm plug adaptor can be used.

£99.00 / €148.50

KI-PP178 SECONDARY IGNITION PICK-UPKI-PP178
Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection; attempting to make a direct connection will almost certainly damage the measuring instrument.

The PP178 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire — this avoids the need for direct connection.

The PP178 comes with a shielded 2.5m (100 inch) lead. It is suitable for use with conventional ignition systems and most HEI and DIS systems. Our library of Automotive Waveforms contains example waveforms captured using an automotive oscilloscope and the PP178.

£35.00 / €52.50

KI-TA000 AUTOMOTIVE TEST LEADSKI-TA000
The TA000 test lead has been custom made for automotive use with a Pico automotive oscilloscope. Its length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to reduce noise pickup.

£20.00 / €30.00

KI-PP324 6 WAY UNIVERSAL BREAKOUT LEADSKI-PP324
Pico’s universal 6-way breakout leads eliminate the need to own many specific breakout leads for engine diagnostics. The breakout leads are available with 3 different sizes of connectors: 1.5 mm, 2.3 mm and 2.8 mm.

The breakout lead is simply connected into the existing cable loom and enables voltage readings to be taken from the numerous sensors in the engine compartment. The output signal can then be taken from the 4 mm banana plugs into the input of the PicoScope oscilloscope using the TA000 test lead.

£129.00 / €193.50

KI-TA012 2 PIN AUTOMOTIVE BREAKOUT LEADKI-TA012
The TA012 breakout lead enables voltage readings to be taken from the numerous sensors in the engine compartment. The breakout lead is simply connected into the existing cable loom, and the output signal can then be taken from the two 4 mm banana plugs into the automotive oscilloscope using the TA000 test lead.

Note: A TA000 test lead will be required to convert the 4 mm banana plug connection on the TA012 into a BNC connector suitable for plugging into the PicoScope

£25.00 / €37.50

PICO AUTOMOTIVE
PICO AUTOMOTIVE

Since its launch in 2002, the success of the Automotive Diagnostics Kit has been unrivalled and has turned the market for automotive diagnostics on its head.

Recent motor industry awards include:

2005
Commercial Vehicle Workshop magazine — Top Product
2003
Professional Motor Mechanic magazine — Top Product of 2003
MOTOR magazine — Top 20 Tools of 2003 award winner

2002
Professional Motor Mechanic magazine — Top Product of 2002