|
ATTENUATOR SET: BNC 50 OHM 1 W 1 GHz, 3, 6, 10 AND 20 dBThe TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector.
SPECIFICATION
Attenuation: 3, 6, 10, 20 dB
Bandwidth: DC to 1 GHz
Max. power dissipation: 1 W
Input impedance: 50 Ù
Output impedance: 50 Ù
VSWR: 1.5:1 or better
Dimensions: 56 x 20 x 17 mm
Connectors: BNC, 1 male + 1 female |  |
|
 |
|
 |
|
|
FEED-THROUGH TERMINATORThe TA051 feed-through attenuator is a coaxial terminator with BNC connectors.
It is useful for connecting signals from 50 ohm sources into instruments with highimpedance
inputs, such as oscilloscopes.
SPECIFICATION
Bandwidth: DC to 1 GHz
Max. power dissipation: 1 W
Input impedance: 50 Ù
Dimensions: 56 x 20 x 17 mm
Connectors: BNC, 1 male + 1 female |  |
|
|
|
|
|
|
CURRENT CLAMP 60 A AC/DC (4 mm BANANA PLUG OR BNC)Clamp-on current probes or “current clamps” enable you to measure currents without breaking the electric circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped closed to form a magnetic loop around the conductor.
Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.
The Pico range of current clamps can be used with Pico oscilloscopes and data loggers, as well all major brands of oscilloscopes and multimeters. |
|
|
|
CURRENT CLAMP 60 ASPECIFICATION
Range: 10 mA to 60 A
AC frequency range: Up to 20 kHz
Max. conductor size: 9 mm
Operational temp: 0°C to 50°C, 70% RH
|  |
|
|
|
|
|
|
|
|
|
CURRENT CLAMP 600 ASPECIFICATION
Range: 0 to 600 mV
AC frequency range: 50 Hz to 400 Hz
Max. conductor size: 30 mm
Operational temp: 0°C to 50°C, 70% RH |  |
|
|
|
|
|
|
|
|
